Tech Tip 3 Lower Door Hinge Repair

1) Remove Door Hinge from the car.

2) Place door hinge in a vise or use a C-clamp.

3) Apply pressure on the detent arm and the back of hinge and slowly compress the spring.

4) Make sure the roller and shaft is clear of the detent arm.

5) From the bottom, knock the roller and shaft out of the hinge.

6) Insert new roller and shaft (#41611) in the hinge and install the bolt and washer.

7) Let pressure of slowly and check the roller.

8) Install the hinge back into the car.

Tech Tip 3 - Figure 1
Figure 1
Tech Tip 3 - Figure 2
Figure 2
Tech Tip 3 - Figure 3
Figure 3
Tech Tip 3 - Figure 4
Figure 4
Tech Tip 3 - Figure 5
Figure 5
Tech Tip 3 - Figure 6
Figure 6
Tech Tip 3 - Figure 7
Figure 7
Tech Tip 3 - Figure 8
Figure 8